PRODUCTS

+
  • B.jpg

Trimming V-belt

Model:

K-001


Summary

The main models of synchronous belt and synchronous pulley are trapezoidal teeth-MXL, XL, L, H, XH, XXH, T2.5, T5, T10, T20; High torque arc teeth -3M, 5M, 8M, 14M, 20M, S2M, S3M, S4.5M, S5M, S8M, S14M, etc.


Telephone: +86-574-63788298, 63788299
Mobile phone: Lu Boying +86-13506740971
Mobile: Lu Cong +86-18888686876

Message

Details


The timing belt is made of three main materials: neoprene, glass fiber thread and elastic nylon cloth. It is a special rubber transmission belt used for various mechanical transmissions. It is the use of gear and gear with the anastomosis of transmission, and thus both gear transmission, chain transmission and belt transmission of the three integrated characteristics.
The use of rubber synchronous belt drive has the following advantages:
Ensure synchronous transmission without slip between transmission wheels
The transmission speed ratio can reach 10, and the transmission speed can reach 40 M/S
The transmission power can be from a few watts to the upper kilowatt
The transmission structure is simple and light, and does not require lubrication
No need for large initial tension, small shaft load
Low running noise
Simple maintenance, easy replacement, etc.

Cutting type V belt series products include: cutting type industrial variable speed wide V belt (continuously variable speed belt), cutting type ordinary V belt, cutting type narrow V belt, cutting type automobile V belt, cutting type motorcycle V belt, agricultural machinery with variable speed (half width) V belt, large wedge angle V belt, and various types of V belt products.

 

 

Technical Parameters of Main Products


1、Wide variable speed V-belt for industrial use   2、Cutting ordinary V-belt and narrow V-belt   3、Cut V-belt for motorcycle


Cutting type V belt series products include: cutting type industrial variable speed wide V belt (continuously variable speed belt), cutting type ordinary V belt, cutting type narrow V belt, cutting type automobile V belt, cutting type motorcycle V belt, agricultural machinery with variable speed (half width) V belt, large wedge angle V belt, and various types of V belt products.


V-belt can be divided into ordinary V-belt (Y, Z, A ~ E), narrow V-belt (SPZ ~ SPC) and effective width of narrow V-belt (9N/9J, 15N/15J, 25N/25J) and other types, wedge angle θ = 40 °. Z type is the original national standard O type. Pulley diameter design should take into account the most favorable belt speed: v = 20 m/s,Vmin = 5 m/s, ordinary V-belt Vmax = 30 m/s, narrow V-belt Vmax = 40 m/s. If the pulley diameter d1 is too small, the belt speed will be low, the working load of the belt will increase, and the bending will increase, which will affect the life of the belt; on the contrary, if the belt speed is too large, the centrifugal force of the belt will increase (proportional to v2), which will also reduce the life of the belt.


Ordering need to know
1, the customer provides a sample, the company can also be produced according to the sample.
2. Customers need special specifications or special performance requirements (such as flame retardant, antistatic, non-toxic, etc.) The company can also try to meet customer requirements and give customization.

Online Message


Thank you for your attention to us. Please leave us a message if you have any suggestions or comments.