HOME
ABOUT US
Company Profile
Equipment
PRODUCTS
Synchronous belt
Synchronous pulley
Double-sided toothed synchronous belt
Multi-wedge belt
Automobile synchronous belt
Trimming V-belt
Flat belt
Extra-long synchronous belt
Thickened belt
NEWS
Company News
Industry News
APPLICATION
SERVICE
CONTACTS
Industry Information
Several measures that can be taken for the heating phenomenon of the synchronous wheel
In the current industrial application, a large part of the transmission device will choose synchronous belt and synchronous belt wheel. With the increasing utilization rate of industrial equipment, some unavoidable fault problems will emerge. Serious fault damage needs to be checked and repaired by professionals, and unauthorized treatment may cause more damage.
30
2023
/
08
9 details to help you analyze why rubber synchronous belt failure?
There are many reasons for the failure of rubber synchronous belt. Usually, it is difficult to judge the failure mode of synchronous belt. Therefore, regular recording of the use of synchronous belt products is conducive to the failure of the late synchronous belt, there is a certain basis to judge which failure mode it belongs to, and it can be more targeted to choose appropriate preventive and corrective measures. We have sorted out the following nine cases that lead to the failure of the synchronous wheel:
The replacement of industrial synchronous belt must pay attention to the standard steps
When replacing these products with pulleys, the power should be turned off in advance, the protective cover should be removed, and the motor assembly bolts should be loosened. Move the motor so that the timing belt is loose enough to remove the drive belt without prying it off. Never pry the belt off. Remove the old drive belt and check for abnormal wear. Excessive wear may indicate problems with the design or maintenance of the transmission.